Product Search

    SEARCH NOW FOR ALL YOUR HALDER SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Filter Results
    Results 1-50 of 61.
    HALDER 22690.0221

    HALDER

    22690.0221

    PIN, 10XM8 WITH MALE THREAD & RIBBED SURFACE
    CAN$44.32 Buy Surplus As Low As CAN$28.07
    CAN$28.07
    HALDER 23010.0282

    HALDER

    23010.0282

    M24 TAPPED THROUGH T SLOT NUT 27.6MM SLOT WIDTH, 44 X 18MM BASE WIDTH X HEIGHT, 44 X 36MM OAL X HEIGHT
    CAN$70.91 Buy Surplus As Low As CAN$42.84
    CAN$42.84
    HALDER 22080.0608

    HALDER

    22080.0608

    9MM BODY LENGTH X 8MM BODY DIAM, 8 N INIT TO 18 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 6.5MM BALL DIAM, 1.9MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$6.29 Buy Surplus As Low As CAN$3.77
    CAN$3.77
    HALDER 23010.0144

    HALDER

    23010.0144

    M10 TAPPED THROUGH T SLOT NUT 13.6MM SLOT WIDTH, 22 X 8MM BASE WIDTH X HEIGHT, 22 X 16MM OAL X HEIGHT
    CAN$23.64 Buy Surplus As Low As CAN$14.18
    CAN$14.18
    HALDER 23010.0082

    HALDER

    23010.0082

    M6 TAPPED THROUGH T SLOT NUT 7.6MM SLOT WIDTH, 13 X 6MM BASE WIDTH X HEIGHT, 13 X 10MM OAL X HEIGHT
    CAN$13.45 Buy Surplus As Low As CAN$8.07
    CAN$8.07
    HALDER 22080.0408

    HALDER

    22080.0408

    9MM BODY LENGTH X 8MM BODY DIAM, 10 N INIT TO 20.4 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 6.5MM BALL DIAM, 1.9MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$5.44 Buy Surplus As Low As CAN$3.26
    CAN$3.26
    HALDER 3366.040

    HALDER

    3366.040

    DEAD BLOW HAMMER, 26 OZ, NYLON HEAD, HICKORY HANDLE, 1-1/2" FACE, 14" OAL
    CAN$144.77 Buy Surplus As Low As CAN$87.16
    CAN$87.16
    HALDER 3366.035

    HALDER

    3366.035

    DEAD BLOW HAMMER, 19 OZ, STEEL HEAD, HICKORY HANDLE, 1-3/8" FACE, 13" OAL
    CAN$125.57 Buy Surplus As Low As CAN$75.34
    CAN$75.34
    HALDER 3366.020

    HALDER

    3366.020

    DEAD BLOW HAMMER, 8 OZ, NYLON HEAD, HICKORY HANDLE, 3/4" FACE, 11-3/4" OAL
    CAN$98.98 Buy Surplus As Low As CAN$60.57
    CAN$60.57
    HALDER 3377.140

    HALDER

    3377.140

    30 OZ DEAD BLOW HAMMER NYLON HEAD, 1-37/64" FACE, 11-13/16" OAL, DEAD BLOW REPLACEABLE TIP SLEDGE HAMMER
    CAN$153.64 Buy Surplus As Low As CAN$93.07
    CAN$93.07
    HALDER 04900-600

    HALDER

    04900-600

    PLIERS, TYPE: BLACKSMITH TONGS,JAW TYPE: WOLF'S JAW,OVERALL LENGTH RANGE: 24" AND LONGER,OVERALL LENGTH (INCH): 24,TOOL STYLE: HEAVY-DUTY,JAW WIDTH (INCH): 4
    CAN$273.30 Buy Surplus As Low As CAN$163.98
    CAN$163.98
    HALDER 04900-300

    HALDER

    04900-300

    PLIERS, TYPE: BLACKSMITH TONGS,JAW TYPE: WOLF'S JAW,OVERALL LENGTH RANGE: 12" - 17.9",OVERALL LENGTH (INCH): 12,TOOL STYLE: HEAVY-DUTY, STRAIGHT,JAW WIDTH (INCH): 2
    CAN$141.82 Buy Surplus As Low As CAN$85.68
    CAN$85.68
    HALDER 22080.0004

    HALDER

    22080.0004

    5MM BODY LENGTH X 4MM BODY DIAM, 2.5 N INIT TO 6 N FINAL END FORCE, STAINLESS STEEL PRESS FIT BALL PLUNGER 3MM BALL DIAM, 1MM MAX BALL REACH, 0.1MM TOLERANCE, 0.9MM FLANGE THICKNESS
    CAN$7.78 Buy Surplus As Low As CAN$4.67
    CAN$4.67
    HALDER 3566.030

    HALDER

    3566.030

    10-1/2" LONG REPLACEMENT HANDLE, FOR DEAD BLOW HAMMERS HICKORY
    CAN$22.16 Buy Surplus As Low As CAN$13.30
    CAN$13.30
    HALDER 3377.035

    HALDER

    3377.035

    DEAD BLOW HAMMER, 25 OZ, NYLON HEAD, STEEL HANDLE, 1-3/8" FACE, 11-1/2" OAL
    CAN$127.64 Buy Surplus As Low As CAN$76.82
    CAN$76.82
    HALDER 2301064351

    HALDER

    2301064351

    M8 TAPPED THROUGH T SLOT NUT 15.7MM SLOT WIDTH, 25 X 9MM BASE WIDTH X HEIGHT, 18MM OVERALL HEIGHT
    CAN$51.70 Buy Surplus As Low As CAN$31.02
    CAN$31.02
    HALDER 3508.040

    HALDER

    3508.040

    DEAD BLOW HAMMER TIP, 1-37/64" FACE DIAM, GRADE HARD, WHITE, NYLON
    CAN$26.59 Buy Surplus As Low As CAN$16.25
    CAN$16.25
    HALDER 3508.030

    HALDER

    3508.030

    DEAD BLOW HAMMER TIP, 1-3/16" FACE DIAM, GRADE HARD, WHITE, NYLON
    CAN$16.25 Buy Surplus As Low As CAN$9.75
    CAN$9.75
    HALDER 3377.030

    HALDER

    3377.030

    DEAD BLOW HAMMER, 21 OZ, NYLON HEAD, STEEL HANDLE, 1-3/16" FACE, 11-3/8" OAL
    CAN$135.91 Buy Surplus As Low As CAN$82.73
    CAN$82.73
    HALDER 3366.025

    HALDER

    3366.025

    DEAD BLOW HAMMER, 11 OZ, NYLON HEAD, HICKORY HANDLE, 1" FACE, 12" OAL
    CAN$107.84 Buy Surplus As Low As CAN$65.00
    CAN$65.00
    HALDER 22080.0606

    HALDER

    22080.0606

    7MM BODY LENGTH X 6MM BODY DIAM, 6.5 N INIT TO 13 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 5MM BALL DIAM, 1.6MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$5.38 Buy Surplus As Low As CAN$3.23
    CAN$3.23
    HALDER 22080.0604

    HALDER

    22080.0604

    5MM BODY LENGTH X 4MM BODY DIAM, 2.5 N INIT TO 6.5 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 3MM BALL DIAM, 0.8MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$5.21 Buy Surplus As Low As CAN$3.12
    CAN$3.12
    HALDER 22080.0406

    HALDER

    22080.0406

    7MM BODY LENGTH X 6MM BODY DIAM, 6.2 N INIT TO 12.6 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 5MM BALL DIAM, 1.6MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$3.89 Buy Surplus As Low As CAN$2.33
    CAN$2.33
    HALDER 22080.0008

    HALDER

    22080.0008

    9MM BODY LENGTH X 8MM BODY DIAM, 7 N INIT TO 12.5 N FINAL END FORCE, STAINLESS STEEL PRESS FIT BALL PLUNGER 6.5MM BALL DIAM, 2.4MM MAX BALL REACH, 0.1MM TOLERANCE, 1.1MM FLANGE THICKNESS
    CAN$9.80 Buy Surplus As Low As CAN$5.88
    CAN$5.88
    HALDER 3366.050

    HALDER

    3366.050

    DEAD BLOW HAMMER, 35 OZ, NYLON HEAD, HICKORY HANDLE, 2" FACE, 14-1/2" OAL
    CAN$180.23 Buy Surplus As Low As CAN$109.32
    CAN$109.32
    HALDER 3366.030

    HALDER

    3366.030

    DEAD BLOW HAMMER, 15 OZ, NYLON HEAD, HICKORY HANDLE, 1-3/16" FACE, 13" OAL
    CAN$106.36 Buy Surplus As Low As CAN$65.00
    CAN$65.00
    HALDER 04900-500

    HALDER

    04900-500

    PLIERS, TYPE: BLACKSMITH TONGS,JAW TYPE: WOLF'S JAW,OVERALL LENGTH RANGE: 18" - 23.9",OVERALL LENGTH (INCH): 20,TOOL STYLE: HEAVY-DUTY,JAW WIDTH (INCH): 4
    CAN$212.73 Buy Surplus As Low As CAN$128.52
    CAN$128.52
    HALDER 04900-400

    HALDER

    04900-400

    PLIERS, TYPE: BLACKSMITH TONGS,JAW TYPE: WOLF'S JAW,OVERALL LENGTH RANGE: 12" - 17.9",OVERALL LENGTH (INCH): 16,TOOL STYLE: HEAVY-DUTY,JAW WIDTH (INCH): 3-1/4
    CAN$196.48 Buy Surplus As Low As CAN$118.18
    CAN$118.18
    HALDER 3508.035

    HALDER

    3508.035

    DEAD BLOW HAMMER TIP, 1-3/8" FACE DIAM, GRADE HARD, WHITE, NYLON
    CAN$23.64 Buy Surplus As Low As CAN$14.18
    CAN$14.18
    HALDER 3508.025

    HALDER

    3508.025

    DEAD BLOW HAMMER TIP, 63/64" FACE DIAM, GRADE HARD, WHITE, NYLON
    CAN$19.20 Buy Surplus As Low As CAN$11.52
    CAN$11.52
    HALDER 3508.020

    HALDER

    3508.020

    DEAD BLOW HAMMER TIP, 25/32" FACE DIAM, GRADE HARD, WHITE, NYLON
    CAN$19.20 Buy Surplus As Low As CAN$11.52
    CAN$11.52
    HALDER 23010.0182

    HALDER

    23010.0182

    M16 TAPPED THROUGH T SLOT NUT 17.6MM SLOT WIDTH, 28 X 10MM BASE WIDTH X HEIGHT, 28 X 20MM OAL X HEIGHT
    CAN$25.11 Buy Surplus As Low As CAN$16.25
    CAN$16.25
    HALDER 23010.0162

    HALDER

    23010.0162

    M14 TAPPED THROUGH T SLOT NUT 15.6MM SLOT WIDTH, 25 X 9MM BASE WIDTH X HEIGHT, 25 X 18MM OAL X HEIGHT
    CAN$26.59 Buy Surplus As Low As CAN$16.25
    CAN$16.25
    HALDER 22080.0405

    HALDER

    22080.0405

    6MM BODY LENGTH X 5MM BODY DIAM, 6 N INIT TO 9.4 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 4MM BALL DIAM, 1MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$4.15 Buy Surplus As Low As CAN$2.49
    CAN$2.49
    HALDER EH2444502

    HALDER

    EH2444502

    ADJUSTABLE CLAMPING LEVER
    CAN$110.80 Buy Surplus As Low As CAN$66.48
    CAN$66.48
    HALDER 2212.410

    HALDER

    2212.410

    PLUNGER STAINLESS STEEL W/HEXAGON COLLAR
    CAN$29.55 Buy Surplus As Low As CAN$17.73
    CAN$17.73
    HALDER 3377.160

    HALDER

    3377.160

    62 OZ DEAD BLOW HAMMER NYLON HEAD, 2-23/64" FACE, 12-13/16" OAL, DEAD BLOW REPLACEABLE TIP SLEDGE HAMMER
    CAN$264.43 Buy Surplus As Low As CAN$159.55
    CAN$159.55
    HALDER 3377.150

    HALDER

    3377.150

    42 OZ DEAD BLOW HAMMER NYLON HEAD, 1-31/32" FACE, 12.231" OAL, DEAD BLOW REPLACEABLE TIP SLEDGE HAMMER
    CAN$199.43 Buy Surplus As Low As CAN$119.66
    CAN$119.66
    HALDER 3377.130

    HALDER

    3377.130

    20 OZ DEAD BLOW HAMMER NYLON HEAD, 1-3/16" FACE, 11.4219" OAL, DEAD BLOW REPLACEABLE TIP SLEDGE HAMMER
    CAN$131.48 Buy Surplus As Low As CAN$79.77
    CAN$79.77
    HALDER 3377.060

    HALDER

    3377.060

    62 OZ DEAD BLOW HAMMER NYLON HEAD, 2-23/64" FACE, 12-13/16" OAL, DEAD BLOW REPLACEABLE TIP SLEDGE HAMMER
    CAN$317.61 Buy Surplus As Low As CAN$190.57
    CAN$190.57
    HALDER 22080.0006

    HALDER

    22080.0006

    7MM BODY LENGTH X 6MM BODY DIAM, 5.5 N INIT TO 11.5 N FINAL END FORCE, STAINLESS STEEL PRESS FIT BALL PLUNGER 5MM BALL DIAM, 1.8MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$8.16 Buy Surplus As Low As CAN$4.90
    CAN$4.90
    HALDER 23010.0124

    HALDER

    23010.0124

    M8 TAPPED THROUGH T SLOT NUT 11.6MM SLOT WIDTH, 18 X 7MM BASE WIDTH X HEIGHT, 18 X 14MM OAL X HEIGHT
    CAN$20.68 Buy Surplus As Low As CAN$12.41
    CAN$12.41
    HALDER 23010.0062

    HALDER

    23010.0062

    M5 TAPPED THROUGH T SLOT NUT 5.6MM SLOT WIDTH, 10 X 4MM BASE WIDTH X HEIGHT, 10 X 8MM OAL X HEIGHT
    CAN$13.45 Buy Surplus As Low As CAN$8.07
    CAN$8.07
    HALDER 22080.0404

    HALDER

    22080.0404

    5MM BODY LENGTH X 4MM BODY DIAM, 3 N INIT TO 6.5 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 3MM BALL DIAM, 0.8MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$3.95 Buy Surplus As Low As CAN$2.37
    CAN$2.37
    HALDER 3508.050

    HALDER

    3508.050

    1-31/32" FACE DIAM, GRADE HARD, WHITE DEAD BLOW HAMMER TIP NYLON
    CAN$29.55 Buy Surplus As Low As CAN$17.73
    CAN$17.73
    HALDER 23010.0164

    HALDER

    23010.0164

    M12 TAPPED THROUGH T SLOT NUT 15.6MM SLOT WIDTH, 25 X 9MM BASE WIDTH X HEIGHT, 25 X 18MM OAL X HEIGHT
    CAN$26.59 Buy Surplus As Low As CAN$16.25
    CAN$16.25
    HALDER 23010.0145

    HALDER

    23010.0145

    M8 TAPPED THROUGH T SLOT NUT 13.6MM SLOT WIDTH, 22 X 8MM BASE WIDTH X HEIGHT, 22 X 16MM OAL X HEIGHT
    CAN$23.64 Buy Surplus As Low As CAN$14.18
    CAN$14.18
    HALDER 22080.0605

    HALDER

    22080.0605

    6MM BODY LENGTH X 5MM BODY DIAM, 6 N INIT TO 9.4 N FINAL END FORCE, THERMOPLASTIC PRESS FIT BALL PLUNGER 4MM BALL DIAM, 1MM MAX BALL REACH, 0.1MM TOLERANCE, 1MM FLANGE THICKNESS
    CAN$5.35 Buy Surplus As Low As CAN$3.21
    CAN$3.21
    HALDER 22080.0005

    HALDER

    22080.0005

    6MM BODY LENGTH X 5MM BODY DIAM, 3 N INIT TO 6.5 N FINAL END FORCE, STAINLESS STEEL PRESS FIT BALL PLUNGER 4MM BALL DIAM, 1.4MM MAX BALL REACH, 0.1MM TOLERANCE, 0.9MM FLANGE THICKNESS
    CAN$7.99 Buy Surplus As Low As CAN$4.79
    CAN$4.79
    HALDER 3566.040

    HALDER

    3566.040

    11" LONG REPLACEMENT HANDLE FOR DEAD BLOW HAMMERS HICKORY
    CAN$29.55 Buy Surplus As Low As CAN$17.73
    CAN$17.73
    Next
    1 2